xcsports

Customer Requirement:

• There is deviation of the center height between turret and spindle; tool-change position of the servo turret does not exact; the sealing of shielding cover for each linear axis is damaged; both CNC system and tube are aged. 
• It is necessary to change the configured CNC system, recover the precision of the machine tool, change the aged components and reinstall the automatic chip-remover and the pneumatic door. 

• Adopting the GSK 988T CNC system to configure the servo motor with servo drive to perform the reformation. 
• To guarantee that the center height is equal of spindle and turret by adjusting the spindle basement and turret. 
• Overhaul the turret and change into the servo motor made by GSK, and then drive the rotation of the turret therefore; slightly adjust the position of detection switch and guarantee the precision of the tool-change position. 
• Changing the seal of the cover of each axis for protecting the screw rod and guiding of it.
• Adding the chain-plate automatic cooling chip-removing system, the chip-remover is installed under the cover of the whole machine, and the chips will be come out from the right of the machine tool. 
• Adding the pneumatic door with the in-position detecting signal of switch door. 
• Check the chuck, hydraulic, lubrication, cooling and pneumatic system and change the aged components. 
• Redesign the schematic diagram of electric control of the machine tool, change the electric control and spare parts and rewiring. 

• Recover the precision and the overall functions of the machine tool and stably operate it. 
• To meet the component machining requirements of customers.